beautypg.com

Air Suspension C-2130 REV 10 User Manual

Page 9

background image

9

REV 10

05/02/2014

C-2130

C-2130

ARNOTT COil spRiNg CONVERsiON kiT

FOR

1999-2005

AUDi AllROAD

10.

Using a paint MarKer, MarK tHe eccentric bolts alignMent at tHe KnUcKle anD reMove it being

sUre to tUrn tHe nUt on tHe bacKsiDe. (FigUre 30-9)

11.

aFter all Fasteners are reMoveD, tHe loWer control arM sHoUlD Hang Free.

FigUre 30-9

FigUre 40-1

REAR coIL stRUt INstALLAtIoN

1.

install tHe rear coil strUt Up FroM tHe bottoM, MaKing sUre tHe locating pins are Facing

oUtWarD. install tHe tWo (2) FactorY Upper MoUnting bolts anD tigHten. (FigUre 40-1)

2.

sWing tHe control arM Up to align tHe sHocK bUsHing to its MoUnting Hole.

secUre WitH tHe FactorY HarDWare.

Tighten all nuts and bolts to manufacturer's specifications during the installation process.