Air Suspension A-2239 REV 4 User Manual
Page 6
6
REV 4
11/05/2013
A-2239
A-
2239
ARNOTT FRONT AIR SPRING
FOR
1999-2005
AUDI ALLROAD
14.
REMOVE AND DISCARD THE OLD O-RING USED TO SEAL THE AIR SPRING TO THE SHOCK. THIS O-RING WILL
NOT BE REUSED IN THE NEW ASSEMBLY. (FIGURE K)
AIR SPRING INSTALLATION
1.
LUBRICATE THE O-RING IN THE BOTTOM OF THE NEW AIR SPRING ASSEMBLY, AND SLIDE THE NEW AIR SPRING
OVER THE SHOCK ABSORBER. (FIGURE L)
FIGURE K
FIGURE L
Tighten all nuts and bolts to manufacturer's specifications during the installation process.
Do not remove the air fitting from the air spring. Doing so may cause damage and/or void warranty. Remove the white
shipping pin from the new air fitting and insert the air line until fully seated.
See also other documents in the category Air Suspension For the car:
- A-2730 REV 1 (8 pages)
- A-2731 REV 1 (9 pages)
- SK-2716 REV 1 (6 pages)
- C-2130 REV 10 (13 pages)
- A-2133 REV 6 (9 pages)
- SK-2717 REV 1 (7 pages)
- P-2134 REV 5 (6 pages)
- AS-2744 REV 1 (6 pages)
- AS-2743 REV 1 (6 pages)
- AS-2561 REV 7_W CORE TOP (6 pages)
- AS-2563 REV 7_W CORE TOP (6 pages)
- P-2539 REV 5 (7 pages)
- AS-2560 REV 7_W CORE TOP (6 pages)
- AS-2562 REV 7_W CORE TOP (6 pages)
- C-2616 REV 1 (15 pages)
- A-2572 REV 4 (10 pages)
- A-2571 REV 4 (10 pages)
- P-2496 REV 3 (7 pages)
- A-2523 REV 5 (8 pages)
- P-2740 REV 1 (10 pages)
- AS-2581 REV 1 (6 pages)
- AS-2580 REV 1 (6 pages)
- P-2469 REV 3 (6 pages)
- P-2658 REV 1 (6 pages)
- A-2755 REV 1 (4 pages)
- AS-2306 REV 2 (4 pages)
- P-2494 REV 5 (6 pages)
- A-2465 REV 5 (5 pages)
- A-2502 REV 2 (4 pages)
- A-2504 REV 2 (4 pages)
- A-2501 REV 2 (4 pages)
- A-2503 REV 2 (4 pages)
- A-2464 REV 5 (5 pages)
- AS-2305 REV 2 (4 pages)
- P-2655 REV 1 (7 pages)
- A-2642 REV 1 (5 pages)
- A-2384 (3 pages)
- P-2136 REV 4 (5 pages)
- A-2610 REV 2 (3 pages)
- 93,96-CR Cadillac Front/Rear Shock Kit (7 pages)
- 93,96,97-CF Cadillac Strut (4 pages)
- 93,96-CR Cadillac Rear Air Shock Kit (4 pages)
- AS-2708 REV 1 (4 pages)
- C-2532 (9 pages)