Asus TS Mini - Manual (Page 84)

84 HOME SERVER TS mini
Enabling remote access
To access your data and home computers from the internet
whenever you are, you need to configure Windows Home Server to
allow Remote Access.
1. Log on to the Windows Home Server Console.
2. Click Settings on the upper right corner of the Windows Home
Server Console window, and then click Remote Access in the left
pane.
3. Under the Remote Access heading, click Turn On to enable the
remote access configuration to your home server.
4. Follow the onscreen instructions to go through the remote
access configuration.
5. Under the Router heading, when you enable the remote access
configuration, Windows Home Server automatically configures
your broadband router to forward Web site requests to your
home server. Your router must support Universal Plug and Play
(UPnP) and UPnP must be enabled on your router for Windows
Home Server to automatically configure it.