Asus WiFi-b - Manual (Page 39)

Chapter 4: Utility information 4-5
Status - Ping Tab
The Ping tab allows you to verify the
connection of the host computer with
another computer in the network. To ping
a connection:
1. Type the IP address of the connection
you want to verify in the IP Address
field.
2. Configure the ping session by
assigning the size and count of packet
to send, and the time limit for a ping
session to continue (in milliseconds).
3. Click the Ping button.
During the ping session, the Ping button toggles into a Stop button. Click Stop
anytime to cancel the ping session.
The session field displays information on
the verified connection including the
roundtrip time (minimum, maximum, and
average) and packets sent, received, and
lost after a ping session.
Click the Clear button to clear the
session field.
Config - Basic Tab
The Basic tab provides general
information on network types and other
configurations.
Network Type. Select which type of
network you wish to use. Select
Infrastructure mode to establish a
connection with an access point (AP). In
this mode, your system can access
wireless LAN and wired LAN (Ethernet)
via the AP. Select the Ad Hoc mode to
communicate directly with other mobile
clients within the WiFi-b™ range.