Asus EB1012P - Manual (Page 43)

Eee Box PC 4
English
Using the USB storage device
(USB Restore)
When the Recovery Partition in your system is crashed, use the USB
storage device to restore the system to the factory default partition
or the factory environment data to the entire hard disk.
1. Disable Boot Booster in BIOS setup.
2. Connect the USB storage device that you back up the factory
environment data to.
. Press for EeeTop PC or for EeeBox PC on bootup
and the Please select boot device screen appears. Select USB:
XXXXXX to boot from the connected USB storage device.
4. Select the language and click Next.
5. Select Restore and click Next.
6. Select a task and click Next. Task options:
• Restore the OS to the Default Partition only
Select this option if you simply want to restore the OS to the
factory default partition. This option deletes all data on the
system partition “C” and keeps the partition “D” unchanged.
After you click Next, the factory default partition will be
displayed. Click Next again.
• Restore the Whole Hard Disk
Select this option if you want to restore your EeeTop PC/
EeeBox PC to the factory default state. This option deletes all
data from your hard disk and creates a new system partition
as drive “C” , an empty partition as drive “D“ and a Recovery
Partition.
7. Data on the factory default partition or on the whole hard disk
will be cleared depending on the option you selected in the
previous step. Click Restore to start the task.
8. When the restore is completed successfully, click Reboot to
restart the system.