Rear panel – Asus DVD-E616P1 User Manual
Page 11
ASUS DVD-E616P1 User Manual
11
Rear Panel
7. Audio Output
This connector is for an analog audio output cable. This connector is
compatible with “Molex 70553”.
Pin
Name
Description
1
L
Left channel audio output
2 & 3
G
Ground
4
R
Right channel audio output
8. Device Configuration Jumper
These pins allow you to select either Master, Slave, or Cable Select
mode for the DVD-ROM device. (Refer to page 12 for jumber settings.)
Pin
Name
Switch Status
Description
1
MA
ON
Master mode
2
SL
ON
Slave mode
3
CS
ON
Cable select mode
4-5
Reserved
9. Host IDE Interface
This connector is for a 40-pin IDE cable to connect the drive to the IDE
interface on the motherboard.
10. DC Input
This DC connector is for a 4-pin power cable from the system power
supply.
7
8
9
10