Asus K8N-VM - Manual (Page 61)

ASUS K8N-VM 2-23
CMD-ADDR Timing Mode [2T]
Configuration options: [1T] [2T]
Bank Interleaving [Auto]
Sets the bank interleaving feature.
Configuration options: [Auto] [Disabled]
ECC Configuration
DRAM ECC Enable [Disabled]
Allows you to enable or disable the DRAM ECC.
Configuration options: [Disabled] [Enabled]
ECC Configuration
DRAM ECC Enable [Disabled]
MCA DRAM ECC Logging [Disabled]
ECC Chip Kill [Disabled]
DRAM SCRUB REDIRECT [Disabled]
DRAM BG Scrub [Disabled]
L2 Cache BG Scrub [Disabled]
Data Cache BG Scrub [Disabled]
MCA DRAM ECC Logging [Disabled]
Enables or disables the MCA DRAM ECC logging.
Configuration options: [Disabled] [Enabled]
ECC Chip Kill [Disabled]
Enables or disables the ECC Chip Kill function.
Configuration options: [Disabled] [Enabled]
DRAM SCRUB REDIRECT [Disabled]
Enables or disables the DRAM SCRUB REDIRECT.
Configuration options: [Disabled] [Enabled]
DRAM ECC allows
hardware to report
and correct memory
errors automatically
maintaining system
integrity.
The Bank Interleaving item appears only when you use a memmory that
supports this function.
Burst Length [4 Beats]
Sets the operating burst length.
Configuration options: [8 Beats] [4 Beats] [2 Beats]
Software Memory Hole [Enabled]
Enables or disables the software memory hole.
Configuration options: [Disabled] [Enabled]