Asus SL1000 - Manual (Page 6)

Technical Support Department, ASUSTek Computer 2005/7/12
6
The Static NAT mapping will be displayed.
3. Configure an outbound ACL rule
Click Firewall>Outbound ACL and configure an outbound ACL rule. The following
configuration means the router will translate and map source IP
192.168.1.2~192.168.1.5 to the real IP range defined in NAT pool. As the result, source
IP in outgoing packets from the router represents the real IP, not the internal IP.
4. If you intend to allow external users bypass the firewall and access to internal hosts,
you need to create an inbound ACL rule as below in Firewall>Inbound ACL.