beautypg.com

Starting a programme without delay start, Starting a programme with delay start, Opening the door while the appliance operates – AEG F55030W0P User Manual

Page 27: Cancelling the programme, At the end of the programme

background image

Starting a programme without
delay start

1. Open the water tap.
2. Press the on/off button to activate

the appliance. Make sure that the ap-
pliance is in setting mode.

3. Close the appliance door.
4. Turn the programme knob until the

marker on the knob is aligned with
the programme you want to set.
• The programme duration flashes in

the display.

• The phase indicators of the set

programme come on.

5. Press Start. The programme starts.

• Only the indicator of the phase in

operation stays on.

• The display shows the programme

duration that decreases with steps
of 1 minute.

Starting a programme with
delay start

1. Set the programme.
2. Press Delay again and again until the

display shows the delay time you
want to set (from 1 to 24 hours).
• The delay time flashes in the dis-

play.

3. Press Start. The countdown starts.

• The display shows the countdown

of the delay start that decreases
with steps of 1 hour.

• The phase indicators of the set

programme go off.

• When the countdown is completed,

the programme starts.
– The indicator of the phase in opera-

tion comes on.

Opening the door while the
appliance operates

If you open the door, the appliance
stops. When you close the door, the ap-
pliance continues from the point of inter-
ruption.

Cancelling the delay start
while the countdown operates

1. Press and hold Multitab and Delay

at the same time until:
• The programme duration flashes in

the display.

• The phase indicators come on.

2. Press Start. The programme starts.

Cancelling the programme

Press and hold Multitab and Delay at
the same time until:
• The programme duration flashes in

the display.

• The phase indicators come on.

Make sure that there is detergent
in the detergent dispenser be-
fore you start a new programme.

At the end of the programme

When the programme is completed, the
phase indicators go off and the display
shows 0.
1. Press the on/off button to deactivate

the appliance.

2. Close the water tap.

If you do not press the on/off
button, the Auto Off device au-
tomatically deactivates the appli-
ance after some minutes. This
helps to decrease the energy
consumption.

Let the dishes become cold be-
fore you remove them from the
appliance. Hot dishes can be
easily damaged.

First remove the items from the
lower basket, then from the up-
per basket.

There can be water on the sides
and on the door of the appli-
ance. Stainless steel becomes
cool more quickly than the
dishes.

ENGLISH

27