Asus TC710 - Manual (Page 30)

2-8 Thin Client TC710
2.6 Turning on the system
Connect the supplied AC adapter to the DC IN jack on the system
rear panel, and then press the power switch on the front panel to
turn on the system.
2
4
1
3
• When your TC710 is not in use, unplug the power adapter or
switch off the AC outlet to save on power consumption.
• Adjust the power management settings in the Window®
Control Panel. This is to ensure that your TC710 is set to a low
power consumption mode and is fully operational at the same
time.
To enter the BIOS setup, press repeatedly during bootup.