Asus ET2410IUTS - Manual (Page 26)

English
26 All-in-one PC ET2410/ ET2210 Series
Setting up your All-in-one PC
Connecting the wired keyboard and mouse
Connect the keyboard and the mouse to the USB port on the rear panel. You may also ou may also
connect the keyboard and mouse to the USB port on the left side of the panel if the keyboard
cable is not long enough..
1. Simply reconnect if the wireless keyboard and mouse lose connection. Avoid other nearby
WiFi devices at least 20 cm as they may interfere with the connection.
2. The illustrations above are for reference only. Actual appearances and specifications (wired
or wireless) of the keyboard and mouse may vary by territory.
Connecting the wireless keyboard and mouse
1. Install batteries to the wireless keyboard and
mouse.
2. Plug the wireless dongle for keyboard and mouse
to a USB port.
3. Push the buttons at the back of both the
keyboard and mouse to connect with the All-in-
one PC.
4. You can begin using the wireless keyboard and
mouse.
1
2
1 2