Asus P5G41-M LE - Manual (Page 33)

ASUS P5G41-M LE 1-23
2. Keyboard power (3-pin KBPWR)
This jumper allows you to enable or disable the keyboard wake-up feature. When you
set this jumper to pins 2–3 (+5VSB), you can wake up the computer by pressing a key
on the keyboard (the default is the Space Bar). This feature requires an ATX power
supply that can supply at least 1A on the +5VSB lead, and a corresponding setting in
the BIOS.
3. USB device wake-up (3-pin USBPW1-4, 3-pin USBPW5-8)
Set these jumpers to +5V to wake up the computer from S1 sleep mode (CPU stopped,
DRAM refreshed, system running in low power mode) using the connected USB
devices. Set to +5VSB to wake up from S3 and S4 sleep modes (no power to CPU,
DRAM in slow refresh, power supply in reduced power mode).
P5G41-M LE Keyboard Power Setting
2 1 2 3
+5V
(Default)
+5VSB
KBPWR
P5G41-M LE
P5G41-M LE USB Device Wake Up
2 1 2 3
+5V
(Default)
+5VSB
USBPW5-8
2 1 2 3
+5V +5VSB
(Default)
USBPW1-4
P5G41-M LE