Asus RS700D-E6/PS8 - Manual (Page 58)

5-4 Chapter 5: BIOS setup
5.1.2 ASUS CrashFree BIOS 3 utility
The ASUS CrashFree BIOS 3 utility is an auto recovery tool that allows you to
restore the BIOS file when it fails or gets corrupted during the updating process.
You can restore a corrupted BIOS file using the motherboard support DVD or a
USB flash drive that contains the BIOS file.
The BIOS file in the motherboard support DVD may be older than the BIOS file
published on the ASUS official website. If you want to use the newer BIOS file,
download the file at support.asus.com and save it to a USB flash drive.
Recovering the BIOS
To recover the BIOS
1. Turn on the system.
2. Insert the motherboard support DVD to the optical drive, or the USB flash
drive containing the BIOS file to the USB port.
3. The utility automatically checks the devices for the BIOS file. When found,
the utility reads the BIOS file and starts flashing the corrupted BIOS file.
4. Turn off the system after the utility completes the updating process and
power on again.
5. The system requires you to enter BIOS Setup to recover BIOS setting. To
ensure system compatibility and stability, we recommend that you press
to load default BIOS values.
DO NOT shut down or reset the system while recovering the BIOS! Doing so
can cause system boot failure!