AEG HE634070XB - Manual (Page 20)

Sensor field Function
7 To activate and deactivate the STOP
+GO function.
8 To activate and deactivate the outer
rings.
3.2 Heat setting displays
Display Description
The cooking zone is deactivated.
- The cooking zone operates.
The STOP+GO function operates.
The Automatic Heat Up function operates.
+ digit There is a malfunction.
/ / OptiHeat Control (3 step Residual heat indicator): con-
tinue cook / stay warm / residual heat.
Lock / The Child Safety Device operates.
The Automatic Switch Off function operates.
3.3 OptiHeat Control (3 step
Residual heat indicator)
WARNING!
/ / The risk of burns
from residual heat!
OptiHeat Control shows the level of the
residual heat.
4. DAILY USE
You operate the hob with the knobs
of the oven. The Daily Use chapter for
the oven tells how to operate the hob.
When a cooking zone operates,
it hums for a short time. This is
typical of all ceramic glass cook-
ing zones and does not show
that the appliance operates in-
correctly.
4.1 Automatic Switch Off
The function deactivates the appliance
automatically if:
• All cooking zones are deactivated (
).
• You do not set the heat setting after
you activate the appliance.
• You spill something or put something
on the control panel for more than 10
seconds, (a pan, a cloth, etc.). An
acoustic signal sound some time and
the appliance deactivates. Remove the
object or clean the control panel.
• You do not deactivate a cooking zone
or change the heat setting. After some
time
comes on and the appliance
deactivates. See below.
• The relation between heat setting and
times of the Automatic Switch Off
function:
•
, - — 6 hours
• - — 5 hours
•
— 4 hours
• - — 1.5 hours
20 www.aeg.com