Miele S 8730 Special - Manual (Page 11)

Fitting the Turbobrush
Model STB 205
This Turbobrush is intended for use
with Miele vacuum cleaners.
^ Instead of the usual floor attachment,
fit the Turbobrush to the telescopic
suction tube. Ensure that the locking
device engages.
Model STB 201 Vario
This Turbobrush has an adapter,
enabling it to be used with non-Miele
vacuum cleaners. The adapter fits
suction tubes with a diameter of
between 30 and 38 mm. Only use the
Turbobrush with high performance
vacuum cleaners.
Opening the air adjustment
slide
The brush is operated by the suction
power of the vacuum cleaner. If the
carpet pile is very deep, airflow through
the Turbobrush will be hindered,
causing the roller brush to rotate more
slowly than usual. This in turn will affect
cleaning results.
^ To increase the airflow, open the air
adjustment slide (left hand illustration).
In all other situations the air adjustment
slide should be closed, to benefit from
the full suction power.
^ Close the air adjustment slide (right
hand illustration).
en - Use
11