Asus P4R800-VM - Manual (Page 29)

ASUS P4R800-VM motherboard user guide 1-19
3. ATX power connectors (20-pin ATXPWR1, 4-pin ATX12V1)
These connectors are for the ATX power supply. The plugs from the power
supply are designed to fit these connectors in only one orientation. Find the
proper orientation and push down firmly until the connectors completely fit.
In addition to the 20-pin ATXPWR connector, this motherboard requires that
you connect the 4-pin ATX +12V power plug to provide sufficient power to the
CPU.
Make sure that your ATX 12V power supply can provide 8A on the +12V lead
and at least 1A on the +5-volt standby lead (+5VSB). The minimum
recommended wattage is 230W, or 300W for a fully configured system. The
system may become unstable and may experience difficulty powering up if the
power supply is inadequate.
P4R800-VM
P4R800-VM ATX Power Connector
ATXPWR1 ATX12V1
+12V DC GND
+12V DC GND
+3.3VDC
-12.0VDC
COM
PS_ON#
COM
COM
COM
-5.0VDC
+5.0VDC
+5.0VDC
PWR_OK
+12.0VDC
+3.3VDC
+3.3VDC
COM
+5.0VDC
COM
+5.0VDC
COM
+5VSB
4. Internal audio connectors (4-pin CD1, AUX1)
These connectors allow you to receive stereo audio input from sound sources
such as a optical drive, TV tuner, or MPEG card.
P4R800-VM
P4R800-VM Internal Audio Connectors
CD(Black) AUX(White)
Right Audio Channel
Left Audio Channel
Ground
Ground