beautypg.com

Asus RT-N11 User Manual

Page 10

background image

RT-N11 EZ Wireless N Router Quick Start Guide

9

PPTP or L2TP user

If you are using PPTP services, select ADSL

connection that requires username,

password and IP address. Fill in the

username and password provided by

your ISP into the fields. Click Next to

continue. For L2TP users, follow the same

instructions above.

Static IP user

If you are using ADSL or other connection

type that uses static IP address, select ADSL

or other connection type that uses static

IP address. Key in the IP address, subnet

mask, and default gateway provided by your

ISP. You can specify DNS servers, or get

DNS information automatically.

3. After the connection type setting

is completed, set up your wireless

interface. Specify to your wireless

router an SSID (Service Set Identifier),

which is a unique identifier attached to

packets sent over WLAN. This identifier

emulates a password when a device

attempts to communicate with your

wireless router via WLAN.

If you want to protect transmitted data, select any of the Security Level below to enable

encryption methods:
Medium: Only users with the same WEP key settings can connect to your wireless router and

transmit data using 64bits or 128bits WEP key encryption. Configure the settings as Open

System/WEP instead of Shared Key/WEP.
High: Only users with the same WPA pre-shared key settings can connect to your wireless

router and transmit data using TKIP encryption.