Asus WL-530g V2 - Manual (Page 21)

WL-530gV2 Pocket Wireless Router User Manual
19
3) Firmware Restoration
Firmware Restoration is a utility that searches for an ASUS Wireless Router that
failed during its firmware upgrading process, then restores or re-uploads the
firmware that you specify. The process takes about three to four minutes. Launch
the rescue mode before you use the Firmware Restoration utility.
To use the Firmware Restoration utility:
1. Unplug WL-530gV2 from the power source.
2. Hold down the Restore button at the back panel and turn on WL-530gV2 to launch the
rescue mode. It indicates that WL-530gV2 is in the rescue mode if the Power LED at the
back panel flashes.
3. From your computer's desktop, click Start > All Programs > ASUS Utility > WL-530g
Router > Firmware Restoration to launch the Firmware Restoration utility.
4. Specify a firmware file, then click Upload.
Note: This is not a firmware upgrade utility and cannot be used on a working ASUS
Wireless Router. Normal firmware upgrades must be done through the web interface.