Asus WL-100W - Manual (Page 13)

ASUS WLAN Card 1
Chapter - Software Reference
Chapter
So
ftw
ar
e
Re
fe
re
nc
e
Status - Status
You can view the information about
the WLAN Card from the Status menu.
The status fields are blank if the WLAN
Card is not installed. You can turn
off the WLAN Card by clicking the
“Disable Radio” button.
Association State
Displays the connection status as
follows:
Connected - The card is now associated with one wireless LAN device. When
operating in Infrastructure mode, this field shows the MAC address of the
access point with which the WLAN Card is communicating. When operating
in Ad Hoc mode, this field shows the virtual MAC address used by computers
participating in the Ad Hoc network.
ASUS Wireless Settings Utility
Wireless Settings is an application for managing the WLAN Card. Use Wireless
Settings to view or modify the configuration settings, or to monitor the operational
status of your WLAN Card. When Wireless Settings is launched, you can see the
tabbed property sheets which categorize the configuration options into groups.
Starting Wireless Settings
• Open the Windows Control Panel, then double-click the ASUS WLAN
Card Settings icon.
or
• Click the Windows
Start button, select Programs | ASUS Utility |
WLAN Card | Wireless Settings.
or
• Right-click the
Control Center icon on the Windows taskbar and
select Wireless Settings.
NOTE: If you have more than one ASUS WLAN device installed on your
computer, you may see a device selection window when you launch the
“Wireless Settings” utility. Select the device you want when such situation
occurs.