Asus P5MT User Manual

Page 149

A S U S P 5 M T S e r i e s

5 - 4 9

Press .

When prompted, select

< S a v e c h a n g e s , t h e n e x i t t h i s m e n u >

< S a v e c h a n g e s , t h e n e x i t t h i s m e n u >,

then press .

To delete a hot spare drive assigned to a RAID set:

From the RAID Properties screen, press to select
< A d d / D e l e t e H o t S p a r e >

< A d d / D e l e t e H o t S p a r e >

< A d d / D e l e t e H o t S p a r e >.

Use the arrow keys to select the spare drive you want to delete.

Move the selection to the H o t S p a r e

H o t S p a r e

H o t S p a r e column, then press to

change the Hot Spare status to [ N o ]

[ N o ]

[ N o ].

Press .

When prompted, select

< S a v e c h a n g e s , t h e n e x i t t h i s m e n u >

< S a v e c h a n g e s , t h e n e x i t t h i s m e n u >,

then press .

Next Array

The Next Array menu allows you to select the other array on the physical
adapter. This screen is enabled when there are more than one array on a
physical adapter. The RAID Properties screen allows display of one array at
a time. This menu allows you to display and operate on the other array(s)
detected.

Activate Array

When there are two arrays on a physical adapter, this menu allows you to
instruct the RAID firmware to activate a selected array. Only one array may
be activated at a time for each physical adapter. For a physical adapter
with multiple arrays, activating one array disables all the remaining arrays.