Asus SCSI 320-2 - Manual (Page 29)

LSI MegaRAID Userʼs Manual
1-22
3. If the setting is to meet individual requirements, please select Custom
Configuration. You could also let the Configuration Wizard set up a
RAID automatically by selecting Auto Configuration. Click Next to
continue.
4. Hold on the Ctrl key of your keyboard and select with your mouse two
ready drives, click on Accept Array to set up Array 1 as RAID 0. Repeat
this procedure to setup Array 2. At least four hard disks are need to setup
RAID 10.
5. Select two hard disks as and set them as Array1, and the rest Array
2. At least two hard disks are needed for setting up RAID 1, and the
number of disks must be even.
6. This warning window will prompt out when hard disks of different sizes
are deployed in a RAID. If hard disks of identical space are used, this
window would not appear. (We recommend using hard disks of a same
model for RAID configuration)