Asus TS300-E7/PS4 - Manual (Page 17)

ASUS TS300-E7/PS4 2-5
2.4 Installing ASUS PIKE SAS RAID card
The ASUS PIKE SAS RAID card allows users to create SAS RAID sets from SAS
hard disk drives connected to the SAS connectors on the motherboard.
1. Insert the PIKE SAS RAID card into the PIKE card slot, ensuring that it is
completely seated on the PIKE card slot.
2. Remove the data cables connected to the SATA connectors on the
motherboard.
3. Connect the data cables, by numerial order, to the SAS connectors labeled
SAS1-4 (blue) on the motherboard.
4. Set the SGPIO_SEL1 jumper on the backplane to pins 2-3 when connecting
data cables to the SAS connectors on the motherboard.
2
3
1
B
A
C
D
A
B
C
D
4
Order P/N Description
90-C1SE10-00UAY20Z PIKE 2008 8-port SAS 6G RAID Kit (RAID 0, 1, 1E)
90-C1SE15-00UAY00Z PIKE 2008/IMR 8-port SAS 6G RAID Kit (RAID 0, 1, 5)
90-C1SEF0-00UAY00Z PIKE 2008 8-port SAS 6G RAID Kit (RAID 0, 1, 5,6,10, 50, 60)