beautypg.com

Getting started, English, 1) wired connection – Asus WL-500gP V2 User Manual

Page 4: 2) wireless connection, Setting ip address for wired or wireless client

background image

WL-500gP V2 Wireless Router Quick Start Guide

English

The ASUS WL-500gP V2 Wireless Router can meet various working scenarios with proper

configuration. The default settings of the wireless router may need change so as to meet your

individual needs. Therefore, before using the ASUS Wireless Router, check the basic settings to

make sure they all work in your environment.
ASUS provides a utility named EZSetup for fast wireless configuration. If you would like to use

EZSetup for your router configuration, refer to chapter 6 of user manual in support CD.

Note: Wired connection for initial configuration is recommended to avoid possible

setup problems due to wireless uncertainty.

1) Wired connection

The ASUS WL-500gP V2 Wireless Router is supplied with an Ethernet cable in the package.

Since the ASUS Wireless Router has integrated auto-crossover function, therefore, you can use

either straight-through or crossover cable for wired connection. Plug one end of the cable to the

LAN port on the rear panel of the router and the other end to the Ethernet port on your PC.

2) Wireless Connection

For establishing wireless connection, you need an IEEE 802.11b/g compatible WLAN card. Refer

to your wireless adapter user manual for wireless connection procedures. By default, the

SSID of ASUS Wireless Router is “default” (in lower case), encryption is disabled and open

system authentication is used.

) Setting IP address for wired or wireless client

To access WL-500gP V2 Wireless Router, you must have correct TCP/IP settings on your wired or

wireless clients. Set the IP addresses of the clients within the same subnet of WL-500gP V2.

Getting IP address Automatically

The ASUS Wireless Router integrates DHCP server functions, therefore, you can make your

PC get IP address automatically from the ASUS Wireless Router.

Note: Before rebooting your PC, switch ON the

wireless router and make sure the router is ready.

Setting up IP address Manually

To set IP address manually, you need to know the default

settings of the ASUS Wireless Router:
• IP address 192.168.1.1
• Subnet Mask 255.255.255.0

Getting started