5 suspend time out [disabled, 6 power button mode [suspend, 7 restore on ac power loss [last state – Asus AW1500-I5 User Manual
Page 87: 8 resume on ring [disabled, 9 resume on lan [enabled, 10 resume on pme# [disabled, 11 resume on rtc alarm [disabled
ASUS PP-DLW motherboard user guide
4-29
4.9.5 Suspend Time Out [Disabled]
When set to any one of the time options, the system goes into standby at
the specified time. When set to Disabled, the system does not go into
standby. This item appears only when the Power Management/APM item
is set to Enabled. Configuration options: [Disabled] [1 Min] [2 Min] [4 Min]
[8 Min] [10 Min] [20 Min] [30 Min] [40 Min] [50 Min] [60 Min]
4.9.6 Power Button Mode [Suspend]
Allows the system to go into On/Off mode or suspend mode when the
power button is pressed. Configuration options: [On/Off] [Suspend]
4.9.7 Restore on AC Power Loss [Last State]
When set to Power Off, the system goes into off state after an AC power
loss. When set to Power On, the system goes on after an AC power loss.
When set to Last State, the system goes into either off or on state
whatever was the system state before the AC power loss. Configuration
options: [Power Off] [Power On] [Last State]
4.9.8 Resume On Ring [Disabled]
Allows you to enable or disable RI to generate a wake event.
Configuration options: [Disabled] [Enabled]
4.9.9 Resume On LAN [Enabled]
Allows you to enable or disable LAN GPI to generate a wake event.
Configuration options: [Disabled] [Enabled]
4.9.10 Resume On PME# [Disabled]
Allows you to enable or disable PME to generate a wake event.
Configuration options: [Disabled] [Enabled]
4.9.11 Resume On RTC Alarm [Disabled]
Allows you to enable or disable RTC to generate a wake event. When this
item is set to Enabled, the items RTC Alarm Date, RTC Alarm Hour, RTC
Alarm Minute, and RTC Alarm Second appear with set values.
Configuration options: [Disabled] [Enabled]