Asus TS300-E6/PS4 - Manual (Page 34)

Chapter 2: Hardware setup 2-14
2. Examine the chassis and ensure the
bay space is free of wires and other
obstructions.
3. Level the HDD module cage latch
counterclockwise.
4. Insert the HDD module cage into the
bay.
4
3
5. When the HDD module cage is
completed inserted, the cage latch
will be pushed back clockwise.
6. Lock the cage latch properly.
6
2.6.2 Installing the second HDD module cage (optional)
This server supports up to eight SAS hard disk drives by installing a second HDD
module cage and an ASUS PIKE RAID card.
This server comes with a 390W single power supply. When installing eight SAS
hard disk drives on the system, pay attention not to install other devices that
may exceed the maximum power output.
1. Release the screw of the front plate
and follow the direction of the arrow
to remove the front plate from the
server chassis.