Asus WL-AM604g - Manual (Page 5)

WL-AM604g 11g WiFi ADSL Router Quick Start Guide
LINK AP ACT xDSL LAN 4 3 2 1 !
English
If your actual connection is not PPPoE or PPPoA, click Manual Setting
to manually set up WL-AM604g. Refer to pages 5-7 for manual setting
instructions.
Quick setup
Log into the WL-AM604g configuration page
1. Key in 192.168.1.1 into the address box of your Web browser and press Enter.
2. A login window appears for the username and password. The default username
and password is admin (in lower case).
3. After logging in, you can see the WL-AM604g configuration page.
ADSL setup
1. By default, the Quick Setup page pops up. The Quick Setup Wizard automatically
detects your ADSL connection type.
2. If ADSL connection is detected, the next page shows your ADSL connection type.
If your ADSL connection is not detected, click Manual Setting to manually
set up WL-AM604g. Refer to pages 5-7 for manual setting instructions.
* If your connection type is PPPoE or PPPoA
For dynamic IP users
Key in your username and password then click Next.
For static IP users
check Use Static IP Address and key in your IP address, then click Next.