Asus RS724Q-E6/RS12 - Manual (Page 42)

Chapter 2: Hardware setup 2-22
9. Remove the SATA/SAS cables from
the onboard SATA1–3 connectors.
10. Connect the SATA/SAS cables
to the SAS1–3 connectors on the
PIKE riser card.
13. Move the SGPIO_SEL jumper in
front of the server node from pin
1–2 to pin 2–3.
11. Align the riser card bracket to
the PCI Express x16 slot on the
motherboard.
12. Press the riser card bracket until
the golden fingers completely fit the
slot and the bracket aligns with the
rear panel.