Asus DSL-N12U (VER.B1) - Manual (Page 6)

6
1
Power LED
Off: No power.
On: Device is ready.
Flashing slow: Rescue mode
Flashing quick: WPS is processing.
2
ADSL LED
Solid light: ADSL link is established.
Flashing: No ADSL link or unable to establish ADSL link.
3
WAN LED
Off: No power or no physical connection.
On: Has physical connection to a wide area network (WAN).
4
LAN LED
Off: No power or no physical connection.
On: Has physical connection to a local area network (LAN).
5
Wi-Fi LED
Off: No Wi-Fi signal.
On: Wireless system is ready.
Flashing: Transmitting or receiving data via wireless connection.
6
Reset button
This button resets or restores the system to its factory default settings.
7
Power (DC-In) port
Insert the bundled AC adapter into this port and connect your router to a
power source.
8
Power switch
Press this button to turn the power on/off.
9
USB 2.0 / USB 1.1 port
Insert a USB .0/USB 1.1 device such as USB hard disks or USB flash drives into
this port.
Insert your iPad’s USB cable into this port to charge your iPad.
Insert your printer’s USB cable into one of these ports to set up your network
printer. For details, refer to the section Setting up your network printer.
10
LAN 1 ~ 4 ports
Connect network cables into these ports to establish LAN connection.
11
WPS button
This button launches the WPS Push Button Configuration process.
12
Wi-Fi switch
Switch to turn the WiFi feature on/off.
13
ADSL port
Connect to a splitter or to a telephone outlet via an RJ-11 cable.