Asus VM40B - Manual (Page 22)

22 VivoPC VM40B
Upgrading memory modules
Your VivoPC comes with two SO-DIMM memory slots that allows
you to install two 2 GB, 4 GB, or 8GB unbuffered with non-ECC DDR3
204-pin SO-DIMMs for a maximum of 16 GB memory.
IMPORTANT! You can only install DDR3 SO-DIMM to the VivoPC’s
DIMM slots.
NOTE: Refer to section VivoPC VM40B Memory configurations for the
list of compatible DIMMs, or go to http://www.asus.com for more
information.
To install or upgrade the memory modules:
1. Turn off your VivoPC.
2. Disconnect all cables and peripherals.
3. Place the VivoPC on a stable and flat surface.