Asus RS720-E7/RS12 User Manual

Page 44

Chapter 2: Hardware setup

2-24

2.8.4

Installing ASMB6 series management board(Default)

Follow the steps below to install an ASMB6 series management board on your

motherboard.
To install the server management board:
1. Locate the ASMB6 connector on the motherboard.

2. Place the board on the ASMB6

connector of the motherboard,

aligning with the pin connectors.

Refer to the Appendix section

for the location of the ASMB6

connector on supported

motherboards.

3. Press the board firmly until it is

completely seated in place.

This manual is related to the following products: