Chapter 1 - introduction, Checking if tcp/ip is already installed, Adding tcp/ip in network properties – Asus ACM6050EB User Manual
Page 7: Changing tcp/ip settings
7
Cable Modem User’s Manual
Chapter 1 - Introduction
Chapter 1
1. Click the Start button
on the desktop. In the Settings menu, select
Control Panel
. Double-click the Network icon
.
Checking if TCP/IP is already installed
2. In the list of installed network
components try to find the TCP/
IP protocol. It may be followed by
the name of the Ethernet
controller. If you cannot locate
anything that begins with TCP/IP,
install it as described below.
Adding TCP/IP in Network properties
3. Select Microsoft from the
manufacturers. In the list of
network protocols browse to
TCP/IP and then double-click it.
Changing TCP/IP Settings
After the TCP/IP protocol is installed, restart your computer and consult
the installation guide provided by your cable operator to complete TCP/IP
configurations.
1. Click Add.
2. Double-click Protocol.