2 internal connectors, Audio 2, 4, 6, or 8-channel configuration – Asus M2Ne User Manual
Page 45

ASUS M2N-E
2-2
Refer to the audio configuration table below for the function of the audio ports in
2, 4, 6, or 8-channel configuration.
Audio 2, 4, 6, or 8-channel configuration
Port
Headset
2-channel
4-channel
6-channel
8-channel
Light Blue
Line In
Line In
Line In
Line In
Lime
Line Out
Front Speaker Out Front Speaker Out Front Speaker Out
Pink
Mic In
Mic In
Mic In
Mic In
Gray
–
–
–
Side Speaker Out
Black
–
Rear Speaker Out
Rear Speaker Out
Rear Speaker Out
Orange
–
–
Center/Subwoofer Center/Subwoofer
10. USB 2.0 ports 1 and 2, 3 and 4. These 4-pin Universal Serial Bus (USB)
ports are available for connecting USB 2.0 devices.
11. Coaxial S/PDIF Out port. This port connects an external audio output device
via an coaxial S/PDIF cable.
12. PS/2 keyboard port (purple). This port is for a PS/2 keyboard.
2.7.2
Internal connectors
1. Floppy disk drive connector (34-1 pin FLOPPY)
This connector is for the provided floppy disk drive (FDD) signal cable. Insert
one end of the cable to this connector, then connect the other end to the
signal connector at the back of the floppy disk drive.
Pin 5 on the connector is removed to prevent incorrect cable connection when
using a FDD cable with a covered Pin 5.
M2N-E Floppy Disk Drive Connector
NOTE: Orient the red markings on
the floppy ribbon cable to PIN 1.
PIN 1
FLOPPY
R
M2N-E