Asus P1 - Manual (Page 14)

EN-14
Operation
Powering on/off the projector
Powering on the projector:
1. Connect the power using the power adapter and peripheral signal cable(s)
connections.
2. Press to turn on the projector.
The projector takes several seconds or so to warm up.
3. Turn on your source (computer, notebook, DVD, etc.). The projector automatically
detects your source.
• If you are connecting multiple sources to the projector simultaneously, press
Input to select your desired signal.
4. If the projector is activated for the first time, select your OSD language with / .
5. You may also select your OSD language after Reset All Settings in Setup menu
has been activated.
Warning
• Never look into the lens when the LED light is on. This can damage your eyes.
• This focal point concentrates high temperature. Do not place any object near it to avoid
possible fire hazard.
Powering off the projector:
1. Press to turn off the projector.
2. Disconnect the power cord from the wall socket if the projector will not be used in
an extended period of time.