Asus DVI-ADD2 - Manual (Page 7)

ASUS DVI-ADD2 7
4.2 Installing the card
Follow these steps to install the DVI-ADD2 card.
CAUTION! Before handling the card, touch a bare metal portion of your
computer to discharge static electricity from your body. Wear a wrist strap
grounded to the computer chassis when handling the card.
1. Make sure that the computer is turned off. Unplug the system power cord from
the electrical socket.
2. Remove the computer cover, then locate the PCI Express x16 slot. Refer to the
motherboard user guide for the slot location.
3. Remove the rear panel bracket opposite the PCI
Express x16 slot. Keep the bracket screw for later use.
4. Carefully insert the card to the slot until it fits completely.
5. Secure the card with the screw that you removed earlier.
6. Replace the computer cover, then plug the system
power cord to an electrical socket.
7. Connect the display device to the DVI-D port using a
DVI-D cable, then turn on the computer.