Asus PSCH-SR/SCSI - Manual (Page 93)

ASUS PSCH-SR motherboard 4-37
Supervisor Password [Enter]
User Password [Enter]
These fields allow you to set passwords.
To set a password:
1. Highlight an item then press .
2. Type in a password using eight (8) alphanumeric characters, then
press .
3. When prompted, confirm the password by typing the exact characters
again, then press . The password field setting is changed to
[Set].
To clear the password:
1. Highlight the password field, and press twice. The following
message appears:
“PASSWORD DISABLED!!! Press any key to continue...”
2. Press any key to return to the menu.
A note about passwords
The Supervisor password is required to enter the BIOS Setup program
preventing unauthorized access. The User password is required to
boot the system preventing unauthorized use.
4.6.6 Security
Supervisor Password Clear
User Password Clear
Password Check [Setup]
Security
Item Specific Help
Supervisor password
control full access.
Select Menu