A-13 software problem - bios updating the bios, Appendix – Asus UL30VT User Manual

Page 63

A-13

Software Problem - BIOS
Updating the BIOS.

1. Please verify the Notebook PC’s exact model and download the latest BIOS file for your model

from the ASUS website and save it in your flash disk drive.

2. Connect your flash disk drive to the Notebook PC and power on the Notebook PC.
3. Use the “Easy Flash” function on the Advanced page of the BIOS Setup Utility. Follow the in-

structions shown.

4. Locate the latest BIOS file and start updating (flashing) the BIOS.

Select Screen

Select Item

Change Field

Enter Go to Sub Screen

F1 General Help

F10 Save and Exit

ESC Exit

BIOS SETUP UTILITY

Main

Advanced

Security Power Boot Exit

Advanced Settings

WARNING: Setting wrong values in below sections

may cause system to malfunction.

IDE Configuration

Start Easy Flash

Internal Pointing Device

[Enabled]

Internal Numeric Pad Lock

[Enabled]

Play POST Sound

[Yes]

Speaker Volume

[4]

Intel Virtualization Tech

Intel VT-d

[Disabled]

DTS-based Thermal Management [Disabled]

Press ENTER to run

the utility to select

and update BIOS.

Press Hotkey F4 at

POST to invoke the

Utility. This

utility doesn't

support :

1. CDROM

2. USB HDD

3. Secondary HDD

Start Easy Flash Utility?

[OK] [Cancel]

AsusTek BIOS ROM Easy Flash Utility V1.15

Current ROM

Update ROM

Note

to move , to determine , to drive select

FLASH TYPE:

SST 25VF080B

PATH:

A:\

PLATFORM:

UL30A

VER:

100

DATE:

06/01/09

PLATFORM:

Unknown

VER:

Unknown

DATE:

Unknown

5. You must “Load Setup Defaults” on the Exit page after updating (flashing) the BIOS.

Drive

File

Appendix