Asus Y482CP - Manual (Page 29)

Notebook PC E-Manual
Charge your Notebook PC.
A. Connect the AC power cord to the AC/DC adapter.
B. Plug the AC power adapter into a 100V~0V power source.
C. Connect the DC power connector into your Notebook PC’s power
(DC) input.
Charge the Notebook PC for 3 hours before using it in
battery mode for the first time.
NOTE: The power adapter may vary in appearance, depending on models
and your region.
NOTE:
Power adapter information:
• Input voltage: 100-0Vac
• Input frequency: 0-0Hz
• Rating output current: 3.A (W), .A (0W)
• Rating output voltage: 1V