Asus UX31A - Manual (Page 63)

Notebook PC User Manual A-5
Security Setting
To set the password:
1. On the Security screen, select Setup Administrator Password
or User Password.
2. Type in a password and press [Enter].
3. Re-type to confirm the password and press [Enter].
4. Password is then set.
To clear the password:
1. On the Security screen, select Setup Administrator Password
or User Password.
2. Enter the current password and press [Enter].
3. Leave the Create New Password field blank and press [Enter].
4. Leave the Confirm New Password field blank and press [Enter].
5. Password is then cleared.
: Select Screen
: Select Item
Enter: Select
+/—: Change Opt.
F1: General Help
F9: Optimized Defaults
F10: Save & Exit
ESC: Exit
Version 2.01.1204. Copyright (C) 2010 American Megatrends, Inc.
Aptio Setup Utility - Copyright (C) 2010 American Megatrends, Inc.
Main
Advanced Boot Main Advanced Boot Security Save & Exit
Password Description
If ONLY the Administrator’s password is set, this only
access to Setup and is only asked for when entering Setup.
If ONLY the user’s password is set, this is a power on
password and must be entered to boot or enter Setup.
In Setup the User will have Administrator rights.
Administrator Password Status NOT INSTALLED
User Password Status NOT INSTALLED
Administrator Password
User Password
HDD User Password Status : NOT INSTALLED
I/O Interface Security
Set Administrator Password
The password length must be
in the following range:
Minimum length 3
Maximum length 20