GC EUROPE Pattern Resin LS - Manual (Page 8)

8
Implant
Restorations
Some examples for the use
of Pattern Resin in
implantology:
Case 1
1. Step-by-step build-up of an
implant suprastructure with
Pattern Resin LS.
3. The implant analogues
have been fixed with Pattern
Resin LS and cast-on titanium
tubes screwed into the
analogues prior to
manufacture of the
superstructure
2. Suprastructure with
integrated horizontal screw
threads. Further crown build-
up will be carried out with
modelling wax. 4. Pattern Resin LS buildup as
a preparatory step for the
manufacture of the
superstructure
3. The high precision fit of the
cast suprastructure
manufactured with the aid of
Pattern Resin LS is
immediately evident. 5. Reduced Pattern Resin LS
frame as a stabilizing basis for
the superstructure.
Case 2
Example of a technique
for passive transfer of the
intra-oral situation to the
working die.
Further examples:
Intra-oral splinting of transfer
abutments
Case 3
1. Maxillary transfer template
after intra-oral connection of
the transfer abutments with
Pattern Resin LS. Implant
analogues are already
inserted for preparation of
the working die.
Transfer of the intra-oral
positions of ceramic
abutments.
2. The transfer template on
the working die. Customized abutment made
of Pattern Resin LS ready for
CAD/CAM technique
(left).Milled zirconium
abutment (right).
Photographs: ZTM U. Buhr,
ZTM B. Weissmann,
ZTM O. van Iperen