QTech Data Systems Intermax Cellular Modem - Manual (Page 3)

DATRAN ll eXcel Cellular IP RTU - Quick Start Guide – v2.1 September 2012
www.qtech.co.nz Tel: 03 3663713
4. Configure your Q03 RTU using Q90 version 3.26 or above.
a.Ensure your Q03 RTU has CDMA/GPRS Support enabled. Check via main menu →
Configuration → Extras Package:
b.Configure the Lower RS232/FSK Modem:
i.Device Type = Not Configured
c.Configure the Upper RS232:
i.Device Type = Maxon EM770W Modem
ii.Baud Rate = 38,400 Baud
iii.Parity = None
iv.Flow Control = Not Used