SCANTECH ID (Champtek company) IG700 - Manual (Page 8)

4
1.3 USE OF THE IG-700
IG-700 is very contemporarily designed and
commonly applicable. It can be connected to
POS or Host system through RS232 cable or
USB cable.
To read a bar code, simply press the trigger
button and aim the blue beam at the bar
codes. It is required to position the beam
vertically intersecting with the bar codes. The
user will hear one beep, and the green LED
will light on to confirm a successful scan.
The programming of the scanner is very
easy. The user only needs to scan all
necessary programming codes. The settings
are directly saved permanently, and all
settings can be disabled after scanning the
factory default bar code.
Due to the powerful decoding processor, the
IG-700 can decode almost all major 1D and
2D codes.