SCANTECH ID (Champtek company) RFR100 - Manual (Page 12)

User Manual – RFR100 433MHz TCPIP Reader
12
Command API
Prototype void param_settimeout(int timevalue)
Description Setting the threshold of command timeout
Parameter Timevalue[in]: Command timeout
Return value None
Prototype int prtcl_stopdvc()
Description Stop the reader to transfer the tag data back to the host
through Ethernet
Parameter None
Return value 0: Successful - operation successful
1: Timeout – No response
2: Error - Reader received command but failed.
Prototype int prtcl_resetmcu()
Description Software reset the reader
Parameter None
Return Value 0 (Successful) – Successful operation
1 (Time out) – No response
2 (Error) – Failed operation
Comment After reset the reader, the Ethernet connection will be
disconnected. Need to re-connect the reader for further
operation.
Prototype int prtcl_startdvc()
Description Start the reader to transfer the tag data back to the host
through Ethernet
Parameter None
Return Value 0 (Successful) – Successful operation
1 (Time out) – No response
2(Error) – Failed operation