Setting the time beam colour – AEG FAV50KVI0P User Manual

Page 32

SETTING THE TIME BEAM
COLOUR

Nine colours are available for this light
beam. You can change the colour or
deactivate it.
1. Press the on/off button to activate

the appliance.

2. Make sure that the appliance is in

setting mode. Refer to ‘SETTING
AND STARTING A PROGRAMME’.

3. Press and hold touchpads (4) and

(5) at the same time until the indica-
tors of touchpads (3), (4), (5) and (6)
flash.

4. Press touchpad (6).

• The indicators of touchpads (3),

(4) and (5) go off.

• The indicator of touchpad (6)

continues to flash.

• The display shows a number and

the letter C. Each number is rela-
ted to a different colour (0C =
Time Beam deactivated).

5. Press touchpad (6) again and again

to change the colour.

6. Deactivate the appliance to confirm.