En g l is h, Maintenance & care – Pfister GT48-SR0K User Manual

Page 4

ENGLISH

CAUTION: Maintenance

DISASSEMBLY

1. Replacement parts may be available at the store where you purchased

your faucet.

2. When replacement parts are not available, please write or call Price Pfister

Consumer Service.

3. Always turn off water and relieve pressure before working on your

faucet.

NOTE: Trim Care

Cleaning Instructions:

For all Handles and decorative finishes, use only a soft damp cloth

to clean and shine. Use of polish, detergents, abrasive cleaners,

organic solvents or acid may cause damage. Use of other than
a soft damp cloth will nullify our warranty!
Special Trim:

Trim products which contain Porcelain or other similar substance

are not acceptable for public areas or Commercial use. Installation

of Said Trim is at Users Risk!

1–800–PFAUCET (1–800–732–8238)

For Toll-Free Pfaucet information call

1–800–PFAUCET (1–800–732–8238)

or visit www.pricepfister.com

• Installation Support

• Care and Warranty Information

13 VALVE CARTRIDGE REMOVAL

Turn off water supplies and relieve pressure before working on your faucet! With

Valves in “Closed” position, unscrew Fastener (13A) and remove Handle Hub (13B) from

Valve Stem (13C). Unscrew Retainer Nut (13D) by turning it counter-clockwise and lift

out Cartridge Assembly (13E) and inspect. Replace parts as necessary. Reassemble

parts by reversing steps.

MAINTENANCE & CARE

12 FLUSHING & AERATOR CLEANING

After installation is complete, remove Aerator Housing (12A). Turn Valves (12B) on

and allow both hot and cold water to run for at least one minute each. While water is

running, check for leaks. To clean the aerator, disassemble Aerator Housing (12A) by

separating the Aerator Shell (12C), Basket (12D), and Washer (12E). Once parts have

been cleaned, reassemble by reversing steps.

12B

13A

13B

13D

13C

13E

12A

12E

12D

12C