PolyPlanar MRD-80 User Manual

Page 12

SIRIUS service, you can only access channel 000 (the SIRIUS ID
channel) and 184 (Preview Channel). Tune to Channel 000 to display
your radio's unique 12-digit SIRIUS ID number (SID). This number is
also available on the back of SIRIUS Tuner SCC1. Write down this
number and call 1-888-539-SIRIUS (1-888-539-7474) with your credit
card handy to activate SIRIUS service. Or, you may go to website
https://activate.siriusradio.com// to activate the service. If you do not
subscribe the full service, the unsubscribed channel will display
"CALL 888-539-SIRIUS to subscribe.

If a SIRIUS TUNER is already connected:
Press MODE button to change to SIRIUS mode.
If there is no SIRIUS TUNER connected this mode will be skipped.
Please connect your SIRIUS Tuner to the SIRIUS port located at the back
of the unit. Then press MODE button to change to SIRIUS mode.

SELECTING A CHANNEL
Press

button to select a channel. Press and Hold

button to go faster.

SEARCHING CHANNEL NUMBER MANNUALLY
Press AS/PS button

―Select: - - - ‖ will show on the display. Use the

PRESET 1, 2 and 3 buttons to select the desired channel number. When
finished, press Function/Select knob to confirm and play.
Explain as follows:
-

If you want to search channel number 176, you have to press 1

button one time to get 1, then press 2 button seven times to get 7, then
press 3 button six times to get 6.
-

Press Function/Select knob to confirm and play.

SELECT A CHANNEL BY CATEGORY
Press MENU button twice to enter category setting then rotate
FUNCTION/SELECT knob to turn on the category. Use the
FUNCTION/SELECT knob again to navigate to all the categories available
then when done selecting a category press FUNCTION/SELECT knob
once or twice to confirm. The unit will only play the selected category.

SELECTING THE FREQUENCY BAND
In SIRIUS mode, press BAND button to locate the desired band. The
reception band will change in the following order:

S1 S2 S3