PolyPlanar ME-52 - Manual (Page 2)

ME-52 Expansion Amplifier 2
————————————————————————————
PO Box 409 Hanover, MD TEL (410) 761-4000 www.polyplanar.com
poly-planar
Marine Audio System
Supports optional external volume control
Water resistant design for confident marine use
INSTALLATION INSTRUCTIONS
Mounting the ME-52:
1) Choose a mounting location that is well ventilated. The Amplifier
generates significant heat when operating at high power levels.
2) It is preferable to mount the unit such that the ventilation fins are vertical
or facing upward.
3)
Drill 1/8” (3mm) pilot holes in the mounting surface corresponding to the
4 mounting flanges of the amplifier. Be sure not to drill into any critical
areas of your boat or vehicle.
4) Fasten the amplifier to the surface securely using the 4 included tapping
screws.
Figure 1 - Amplifier Mounting