Cleaning, Click – Braun 760cc-4 Series 7 User Manual

Page 15

Shaving with the cord
If the shaver has run out of power (discharged),
and you do not have the time to recharge it in the
Clean&Renew station, you may also shave with
the shaver connected to an electrical outlet via
the special cord set.

Cleaning

Automatic cleaning
After each shave, return the shaver to the
Clean&Renew station and proceed as described
above in the section «Before shaving».
All charging and cleaning needs are then
automatically taken care of. With daily use, a
cleaning cartridge should be suffi cient for about
30 cleaning cycles.

The hygienic cleaning cartridge contains alcohol,
which once opened will naturally evaporate
slowly into the surrounding air. Each cartridge,
if not used daily, should be replaced after
approximately 8 weeks.

The cleaning cartridge also contains lubricants,
which may leave residual marks on the outer foil
frame after cleaning. However, these marks can
be removed easily by wiping gently with a cloth
or soft tissue paper.

Manual cleaning

The shaver head is suitable for cleaning
under running tap water.
Warning: Detach the shaver from the
power supply before cleaning the shaver
head in water.

Rinsing the shaving head under running water
is an alternative way to keep the shaver clean,
especially when travelling:

• Switch the shaver on (cordless) and rinse the

shaving head under hot running water.
You may use liquid soap without abrasive
substances. Rinse off all foam and let the
shaver run for a few more seconds.

• Next, switch off the shaver, press the «release»

button

to remove the Foil & Cutter cassette

and let it dry.

• If you regularly clean the shaver under

water, then once a week apply a drop of
light machine oil on top of the Foil & Cutter
cassette.

trimmer

oil

trim

mer

release

trimmer

release

click!

Series 7

Series

oil

trim

mer

release

trimmer

release

click!

Series 7

Series

99500894_760cc_S4-102.indd 15

08.03.2010 11:50:30 Uhr