ADATA SP800 - Manual (Page 4)

SSD Installation Guide for Desktop Computers
4
Step 6- Turn on the computer to verify installation.
Step 7- Configure the BIOS and Partition the drive
A. Power on your computer system normally and follow the on-screen
instruction during boot-up to proceed into the BIOS or CMOS configuration
menu.
B. Select the Auto function in the BIOS/CMOS menu that represents the
SSD. This will allow your system to auto-detect the disk.
C. Locate the SATA settings menu item and ensure the motherboard SATA
ports are enabled.
D. To save new settings and exit the BIOS/CMOS setup menu, choose the
Save and Exit option.
E. Reboot the system or device allowing the changes to take effect.