ADATA DashDrive Air AV200 - Manual (Page 4)

P5 P4
x. Wireless Security
Setting
i. Open your mobile device’s wireless network settings, select the
wireless access point DashDriverAir_XXXXXX, and click connect.
ii. Plug the USB Flash drive or SD card into the AV200 and turn on.
Wait about 35 seconds, until the Blue LED starts flashing.
iii. For iOS users: Go to the Apple Store, and download the free
DashDrive Air application. After installation is complete, use this
application to transfer files.
iv. For users of other
operating systems:
Open the web
browser, and input the
DashDrive Air IP
address (factory
default is
http://10.10.1.1/)
Click DashDrive Air to
browse and download
files from the USB
flash drive or memory
card.
ix. Wireless Basic Settings
for different SSID. If
you don’t want to
change, just click
“Next“directly.
Turning on the AV200
security will prevent
any unauthorized
access to the wireless
network and storage
device. After updating
it, click “Finished” and
wait around 20
seconds to access your
New SSID.
To upload files from
your device to a USB
Flash drive or memory
card, use the upload
function shown at the
bottom of the page.
5. How to transfer files with the AV200
For repeater mode and more detailed information,
please visit the ADATA website
www.adata-group.com