AEG HE604060XB - Manual (Page 15)

3. PRODUCT DESCRIPTION
120/2
10 mm
1 2
4
7
145 mm
145 mm
170 mm
265 mm
3 8
5 6
1
Cooking zone
2
Cooking zone
3
Residual heat indicators
4
Cooking zone
5
Outer ring sensor field
6
Outer ring sensor field
7
Cooking zone
8
Residual heat indicators
3.1 Residual heat indicator
The residual heat indicator comes on
when a cooking zone is hot.
WARNING!
The risk of burns from residual
heat!
4. DAILY USE
You operate the hob with the knobs
of the oven. The Daily Use chapter for
the oven tells how to operate the hob.
When a cooking zone operates,
it hums for a short time. This is
typical of all ceramic glass cook-
ing zones and does not show
that the appliance operates in-
correctly.
4.1 Activation and
deactivation of the outer rings
You can adjust the surface you cook to
the dimension of the cookware.
To activate the outer ring touch the sen-
sor field
/ . The indicator comes
on.
Do the procedure again to deactivate
the outer ring. The indicator goes out.
5. HELPFUL HINTS AND TIPS
5.1 Cookware
Information about the cookware
• The bottom of the cookware must be
as thick and flat as possible.
• Cookware made of enamelled steel
and with aluminium or copper bot-
toms can cause the colour change on
the glass-ceramic surface.
5.2 Energy saving
How to save energy
• If it is possible, always put the lids on
the cookware.
• Put cookware on a cooking zone be-
fore you start it.
• Stop the cooking zones before the
end of the cooking time to use residu-
al heat.
• The bottom of pans and cooking
zones must have the same dimension.
ENGLISH
15